1. 20R-4179 Injector Basic Information

2. 20R-4179 Injector Common Part Number

 (1)  Injector Exchange Information

(2) 20R-4179 Matching Information

3. 20R-4179 Injector Part Number Common Writing

1278216, 127 8216, 1278216, 0R-8682, 0R 8682, 0R8682

4. 20R-4179 Injector Specifications and Dimensions

Injector Size：21cm* 12cm *5cm =1260cm³

Injector Net Weight：0.81kg

Injector Gross Weight：0.82kg

Injector Quality：China Made New

Package Size：23 cm* 14 cm *7 cm = 2254cm³

Injector Type：Mechanical Injector

MOQ：4 Pieces

5. 20R-4179 Injector Parameter

Adaptation System：Common Rail System

Injector Series：3116 Series

Injector Type：Mechanical Injector

Vehicle Configuration Information: 3116 Engines

6. 20R-4179 Injector Quality Control

• Injector Testing

All injector spare parts are tested for electrical characteristics, accuracy, high temperature, low temperature, withstand voltage, leakage, durability, and various working conditions.

• Injector Assembling

And the quality control of the injector production and installation process, our company strictly follows the standard product installation Data and product installation steps to install, such as injector stroke test, injector solenoid valve tightening torque, injector nozzle tightening torque.

• Injector Inspection

The factory inspection of the injector is undergone full inspection, random inspection, and batch inspection three inspections. Different brands of test benches are used to test the same fuel injector for a total of no less than three times for factory inspection, and the fuel injector installation testing environment are progressed in dust-free workshop.

7. 20R-4179 Injector Causes to Damage 

• Don’t operate properly according to engine maintenance manual during dis-assembly or installation, resulting in damage to the injector .
• The fuel oil used for the vehicle does not meet the standard cause damage to the injector, such as: the water content in the fuel oil exceeds the standard, iron powder, aluminum powder, sulfide impurities exceed the standard, etc.
• The engine is not regularly maintained according to the engine maintenance manual (please refer to the vehicle maintenance manual for the maintenance mileage). For example, failure to replace the lubricating oil of the engine system for a long time will cause abnormal wear of the engine, excessive exhaust gas volume or a large amount of carbon deposits inside the engine. The filter is not replaced during maintenance or the replaced filter cannot reach the original filter standard. all above reasons can cause damage to the injector.
• The abrasion of the oil pump produces iron powder and aluminum powder enter the fuel injector and cause damage to the fuel injector.
• The deformation and abrasion of fuel tank result in iron powder or aluminum powder entering the fuel injector and causing damage to the fuel injector.
• The fuel injector is damaged due to replacement or adjustment of the relevant parts of the fuel injector. For example, the valve clearance does not meet the standard after the engine is repaired, the replacement or modification of the wiring harness connected to the injector fails to meet the original standard.
• The engine is overheated and overloaded for a long time working results in damage to the fuel injector.
• The injector will be damaged naturally at the end of its working life.
• The injector is magnetized (injector parts’ magnetic exceeded) causing the injector to not work properly.
• Before replacing the fuel injector, please check the engine parts carefully according to the engine maintenance manual to avoid the fuel injector being damaged again after replacement.

8. 20R-4179 Injector Warranty Instructions

• Product Warranty Conditions and Instructions

It is necessary to provide pictures, videos, or test reports detected by the injector inspection equipment when the injector is abnormal during use as evidence to feed back to the salesman.

Abnormal conditions are properly explained such as：1.Smoke, 2. Engine shake, 3. Difficulty starting the engine, 4. Engine noise, 5. oil leakage etc.

• Injector Warranty Coverage

Within 15 days after customer receives the 20R-4179 injector, if there is a performance failure and the product has no appearance damage, customer can choose to replace it or repair it;

If the 20R-4179 injector has performance problems during the warranty period (6-12 months), and it is confirmed that it is product’s problems after testing, you can contact our salesmen to replace the same model or a reworked product with the same performance for free;

If the injector house has obvious scratches, it can only be repaired and it will be returned as it is if the product is confirmed to be fault-free.

• Injector Out of WarrantyCoverage

The warranty period has expired.

Injector failure caused by high temperature, high pressure, humidity, rain and snow, saline-alkali land, earthquake, and used in abnormal environment.

Customer disassembles or repairs the injector personally resulting in damage to the injector.

Injector damage caused by man-made reasons (throwing, strong magnetic field magnetization, set fire).

Injector failure or injector damage caused by non-injector design, technology, manufacturing, quality and other issues.

Injector failure due to system pressure exceeding system approved pressure.

Injector failure caused by system voltage exceeding approved voltage.

Injector failure caused by impurities (water, lead, aluminum powder, iron powder, sulfide) in the system fuel exceeding the standard requirements.

Injector failure caused by not installing according to the tightening torque specified in the vehicle engine maintenance manual (the tightening torque is too large or too small).

Injector failure caused by not following the installation angle specified in the vehicle engine maintenance manual.

Injector failure caused by not following the cleaning requirements specified in the vehicle engine maintenance manual.

Injector failure caused by failure to replace consumable parts as specified in the vehicle engine maintenance manual.

Injector failure caused by not complying with the intake system fit clearance and exhaust system fit clearance requirements specified in the vehicle engine maintenance manual.

Failure to replace the consumable parts and the fitting clearance of the oil inlet system pipeline and the fuel injector connection in accordance with the fuel intake system specified in the vehicle engine maintenance manual.

9. 20R-4179 Injector Packing

Domestic express packaging：Usually wrapped in waterproof scotch tape, such as picture No.1.

International express packaging：Wrapped with waterproof yellow tape After wrapping the black protective film, such as picture No. 2.

Pallet Shipping：Use fumigation free and recycling trays that meet export requirements, and use white wrapping protective film to wrap and bind with cable ties for the outside, such as picture No. 3,also, the products can be packaged according to customers’ requirements.

• The packing tray is made of plastic and can be recycled.
• Transparent tape, yellow tape, black wrapping protective film, white wrapping protective film are non-degradable materials, please dispose of them properly.
• Minors are prohibited from using transparent tape, yellow tape, black wrapping protective film, and white wrapping protective film to avoid personal injury.

Domestic express packaging：Wrapped with Transparent tape	International express packaging：Wrapped with yellow tape after wrapping black protective film
Pallet Shipping：Use pallet that meet export requirements, and use white wrapping protective film to wrap and bind with cable ties